Custom Sofa Pricing in Sharjah: 2026 Overview

Sharjah has quietly become the UAE's most important hub for custom furniture manufacturing. The emirate's lower commercial rents and proximity to Dubai mean that skilled workshops can produce high-quality custom sofas at prices that are genuinely difficult to match in Dubai's retail environment.

If you are researching the custom sofa cost in Sharjah, expect to find prices ranging from AED 3,000 for a compact two-seater to AED 25,000 or more for a large L-shaped sectional in premium leather. Majlis furniture in Sharjah carries its own pricing structure, typically starting around AED 5,000 for a basic floor-level setup and scaling significantly for elaborate traditional configurations.

This guide covers every factor that shapes the sofa price in UAE workshops, from frame construction and foam density to fabric selection and stitching quality. Whether you are furnishing a family apartment in Al Nahda, a villa in Al Majaz, or even ordering from Sharjah for delivery to a Dubai Marina apartment, these numbers reflect current 2026 market pricing.

Price Breakdown by Sofa Type

The table below covers standard configurations with quality construction. Prices include fabric or leather upholstery, foam, frame, and delivery within Sharjah and Dubai.

|---|---|---|---|

| 2-seater standard | 150-170 cm | 3,000 - 6,000 | 7-14 days |

| 3-seater standard | 200-230 cm | 4,500 - 9,000 | 7-14 days |

| L-shaped sectional (small) | 250 x 170 cm | 7,000 - 14,000 | 14-21 days |

| L-shaped sectional (large) | 300 x 200 cm | 10,000 - 20,000 | 14-21 days |

| U-shaped sectional | 350 x 250 cm | 14,000 - 25,000 | 21-28 days |

| Chesterfield style | 200-230 cm | 8,000 - 16,000 | 21-28 days |

These prices represent workshops that use kiln-dried hardwood frames and high-density foam. Budget options exist at lower price points but typically use softwood frames and standard-density foam that compress faster in the UAE heat.

Fabric vs Leather: Cost and Performance Comparison

This is the single biggest material decision you will make, and it affects both the cost and the practical performance of your sofa in the UAE climate.

|---|---|---|---|

| Cost per sofa (3-seater) | AED 4,500 - 9,000 | AED 9,000 - 18,000 | AED 5,500 - 10,000 |

For most Sharjah and Dubai homes, quality fabric upholstery offers the best comfort-to-cost ratio. Specifically, look for fabrics with a Martindale rub count above 30,000 (this measures abrasion resistance). Fabrics from brands like Warwick, Designers Guild, and Kvadrat are commonly available through Sharjah workshops.

Genuine leather is a premium choice that makes sense if you have pets, prefer the aesthetic, and keep your AC running consistently. In homes where the AC is turned off during working hours, leather surfaces can become uncomfortably warm and sticky during summer months.

Avoid faux leather (PU leather) for primary seating in the UAE. The combination of heat, humidity, and UV exposure causes PU leather to crack and peel significantly faster here than in cooler climates. Most PU sofas in the UAE begin showing visible deterioration within two to three years.

Foam Density Guide: Why It Matters for UAE Heat

Foam density is measured in kilograms per cubic meter (kg/m3) and directly determines how well your sofa cushions hold their shape over time. In the UAE, this matters more than in temperate climates because heat accelerates foam degradation.

### Standard Density (20-28 kg/m3)

Found in most budget sofas. Feels comfortable initially but compresses noticeably within 12-18 months of regular use. In UAE summer conditions, the heat accelerates this process. Not recommended for primary seating that will be used daily.

### High Density (30-40 kg/m3)

The recommended minimum for a custom sofa that needs to last. High-density foam maintains its shape for 5-8 years of regular use even in UAE temperatures. Most quality Sharjah workshops use 32-36 kg/m3 foam as their standard offering.

### Super High Density (40-50 kg/m3)

Premium option that offers the firmest support and longest lifespan. Ideal for Majlis seating where the foam needs to support seated positions for extended periods. Adds approximately AED 1,000 to AED 2,500 to the total cost compared to standard density.

### Combination Approach

The best custom sofa manufacturers in Sharjah use a layered foam approach: high-density foam as the base layer for structural support, topped with a softer comfort layer. This gives you the durability of dense foam with the initial softness that makes a sofa inviting to sit on. Ask your manufacturer about their foam layering approach; if they use a single density throughout, that is a sign of cost-cutting.

The Majlis Question: Traditional vs Modern Custom Seating

Majlis furniture holds a unique place in the Sharjah market. Whether you are creating a traditional Arabic Majlis for family gatherings or a contemporary interpretation for a modern villa, the pricing structure differs from standard sofa manufacturing.

Traditional floor-level Majlis seating is typically priced by the linear meter because it runs along walls in a continuous configuration. A standard Majlis setup includes the base cushion, backrest cushions, armrest bolsters, and decorative covers.

For a room measuring 4 x 5 meters with seating along three walls (approximately 13 linear meters), expect to invest between AED 10,000 and AED 26,000 depending on fabric choice and cushion quality. This includes the base mattress, back cushions, cylindrical bolsters, and fabric covering.

Modern Majlis interpretations that use modular low-profile sofas rather than traditional floor cushions fall into standard sofa pricing but with lower seat heights (typically 25-35 cm from floor to seat surface versus 40-45 cm for standard sofas).

Sharjah workshops have deep expertise in Majlis furniture because of the emirate's strong cultural connection to this seating tradition. Many workshops that cater primarily to the local Emirati market produce Majlis furniture of exceptional quality at competitive prices.

Frame Construction: What to Look For

The frame is the skeleton of your sofa, and its quality determines whether the piece lasts five years or fifteen. Here is what separates a well-built custom sofa from one that will develop creaks and sags.

### Wood Type

Kiln-dried hardwood (typically beech or oak) is the gold standard. Kiln drying removes moisture from the wood, which is particularly important in the UAE where humidity fluctuations can cause untreated wood to expand and contract. Softwood frames (pine, spruce) are cheaper but less durable and more susceptible to movement in humid conditions.

### Joint Construction

Doweled and glued joints are the minimum acceptable standard. Corner-blocked joints (where additional wood blocks reinforce the corners with glue and screws) indicate higher quality. Staple-only construction, which is common in budget sofas, is the weakest method and the first point of failure.

### Webbing vs Springs

Traditional sinuous (S-spring) suspension or eight-way hand-tied springs provide better support and longevity than rubber webbing. However, quality elastic webbing (such as Pirelli webbing) is a viable middle ground that many Sharjah workshops use effectively. Avoid sofas with thin rubber straps as the sole support system.

Ask to see a frame sample or cross-section when visiting a workshop. Reputable manufacturers are proud of their frame construction and will show you without hesitation.

Sharjah vs Dubai Pricing: Why Sharjah Offers Better Value

This is the practical question behind most searches for the custom sofa cost in Sharjah. The price difference is real, and it has structural economic reasons rather than quality differences.

Sharjah's Industrial Areas (particularly Industrial Area 1 through 15 and the Al Sajaa area) offer commercial rents that are 40-60% lower than equivalent spaces in Dubai's Al Quoz industrial area. These savings flow directly into product pricing.

A custom L-shaped sofa in Sharjah that costs AED 12,000 might be quoted at AED 16,000 to AED 20,000 for identical specifications from a Dubai-based workshop in Al Quoz or a Dubai showroom. The materials, hardware, and construction quality can be exactly the same; the difference is overhead.

Many Dubai residents already know this, which is why the furniture workshops in Sharjah's industrial areas see heavy traffic from cars with Dubai plates. Delivery to any Dubai address is standard, typically costing AED 200 to AED 500 depending on the size of the order and delivery location.

The key is to find workshops in Sharjah that maintain Dubai-level quality standards. Look for workshops that have a proper showroom or sample room, can show you previous work through a portfolio, use branded foam and fabric from known suppliers, and provide a written warranty.

What Should Be Included in Your Quote

When you receive a quotation for a custom sofa, make sure these items are explicitly covered:

- **Frame material** specified (kiln-dried hardwood, plywood, etc.)

- **Foam density** stated in kg/m3 for each layer

- **Fabric or leather** brand, type, and grade clearly identified

- **Cushion construction** (removable covers, zippered, welted seams)

- **Leg or base style** and material (wood, metal, hidden)

- **Delivery** to your address including building access requirements

- **Warranty** terms covering frame, foam, and upholstery separately

- **Timeline** with specific completion date, not just "2-3 weeks"

If any of these are missing from a quote, ask for clarification before committing. Vague quotes lead to misunderstandings about what you are actually paying for.

Sofa Care in UAE Climate: Making It Last

Regardless of whether you choose fabric or leather, the UAE climate demands a few specific care practices to maximize your sofa's lifespan.

**Maintain consistent AC temperatures.** Dramatic temperature swings between when the AC is running and when it is off stress both fabric fibers and leather. If possible, keep your AC at a consistent moderate temperature rather than turning it off completely during the day.

**Rotate and flip cushions monthly.** This distributes wear evenly and prevents one side from compressing permanently. Most quality custom sofas have reversible seat cushions for this reason.

**Keep sofas away from direct sunlight.** UV exposure through floor-to-ceiling windows, which are common in towers across Dubai Marina, JBR, and Downtown, will fade fabric and dry out leather faster than any other factor. Use sheer curtains or UV-blocking window film on south and west-facing windows.

**Professional cleaning annually.** For fabric sofas, an annual deep clean by a professional upholstery service removes embedded dust, sweat salts, and allergens that accumulate in the UAE environment. Budget AED 300 to AED 600 per sofa for professional cleaning.

**Leather conditioning twice yearly.** Apply a quality leather conditioner before summer (May) and after summer (October) to prevent drying and cracking during the peak heat and AC season.

Read our guide on space-saving wardrobe designs for Dubai apartments for more tips on making furniture work in compact UAE living spaces.

Where to Get a Custom Sofa in Sharjah

Finding the right workshop for your custom sofa means balancing quality, price, and reliability. At Arcan Furniture, our Sharjah-based workshop specializes in custom sofas, Majlis seating, and upholstered furniture built specifically for UAE conditions.

Every sofa we build uses kiln-dried hardwood frames, high-density foam (minimum 32 kg/m3), and fabrics or leather sourced from established international suppliers. We provide detailed quotes with every specification clearly stated, so you know exactly what you are paying for before work begins.

**Ready to design your perfect sofa?** Book a free home visit and our design team will come to your home anywhere in Sharjah or Dubai to take measurements, discuss your preferences, and show you fabric and leather samples in your own lighting. You will receive a detailed, no-obligation quote within days.

Visit [arcanfurniture.com/get-quote](https://arcanfurniture.com/get-quote) or call us directly to schedule your consultation. Whether you are in Al Nahda, Al Majaz, Al Khan, or any area across Sharjah, and even if you are ordering from Dubai for Sharjah manufacturing prices, Arcan Furniture makes custom seating accessible and straightforward.

How Much Does a Custom Sofa Cost in Sharjah?