Cost Guides

Custom Furniture Cost in Dubai 2026: Prices for Every Piece in One Place

November 5, 20266 min read
Custom Furniture Cost in Dubai 2026: Prices for Every Piece in One Place

Short answer: custom furniture in Dubai and Sharjah costs from about AED 1,500 for a dressing table to AED 65,000 for a large kitchen. The table below lists the range for each piece Arcan makes; the final price depends on size, material, hardware and your site, and is set out line by line in your quote.

Custom Furniture Prices in Dubai at a Glance

These are the ranges Arcan works from for made-to-measure pieces in Dubai and Sharjah, as published on each service page in November 2026. They are ranges, not fixed prices: two pieces of the same type can sit at opposite ends depending on the factors in the next section.

PieceTypical rangeDetailed guide
Dressing table or vanityAED 1,500–15,000Custom dressing tables
Office desk or meeting tableAED 1,800–20,000Office furniture
TV unit or media wallAED 2,000–30,000TV units, TV unit prices
Bed (platform, storage, kids, king)AED 2,500–9,000Custom beds, bed price guide
WardrobeAED 3,500–35,000Bespoke wardrobes, wardrobe cost guide
SofaAED 3,500–30,000Custom sofas, sofa cost in Sharjah
Walk-in closetAED 7,000–45,000Walk-in closets
KitchenAED 8,000–65,000Custom kitchens, kitchen cabinet cost

If you want a number for your own room rather than a range, the furniture cost calculator turns your type, size, material and location into an indicative AED range in about a minute.

What Moves the Price of Custom Furniture

Size

Most pieces are priced by how much of them there is: linear metres of wardrobe or kitchen run, or the seat count and configuration of a sofa. A single built-in wardrobe on one wall and a floor-to-ceiling fit-out across a master bedroom are the same product type at very different prices, which is why the wardrobe range is so wide.

Material

Material is the second biggest lever. The cost calculator's pricing model uses four tiers, each priced relative to standard MDF:

Material tierRelative to standard
Standard MDFBaseline
Premium HDF with melamineAbout 25% more
Solid oak or walnutAbout 70% more
Lacquered with German hardwareAbout double

For a plain-English comparison of the board types themselves, see MDF vs plywood in the UAE climate and the best wood types for the UAE climate.

Hardware and add-ons

Soft-close hinges, LED lighting, mirror panels, sliding doors and push-to-open systems each add a fixed amount in the calculator model, from AED 450 for soft-close hinges to AED 1,500 for sliding doors. They are small next to the carcass cost but easy to underestimate when you add several.

Location

The calculator treats Dubai as the baseline, Sharjah as about 5% lower and Abu Dhabi as about 10% higher, reflecting delivery and installation logistics. Your exact figure is confirmed in the quote.

Installation and VAT

The calculator adds a flat installation allowance and an optional 5% UAE VAT line, and lets you switch VAT off so you can compare quotes on the same basis. When you compare any two quotes, check whether delivery, installation and VAT are inside each price or added afterwards. That one question explains most of the gap between quotes that look similar.

How to Get a Real Number Before Committing

  1. Run the calculator for an indicative range and use the breakdown to see which factor drives it.
  2. Send a photo and rough dimensions on WhatsApp if you want a first figure before anyone visits.
  3. Book the free home visit. The designer measures the room, and you receive a 3D design and an itemised quote, so you see what each material and accessory costs before you decide.

For how custom pricing compares with buying off the shelf, read custom vs ready-made furniture in the UAE and cheap vs premium custom furniture in Dubai.

custom furniture cost Dubaicustom furniture price Dubaihow much does custom furniture cost in Dubaimade to measure furniture price UAEbespoke furniture cost Dubai 2026

Frequently Asked Questions

Need Custom Furniture?

Get a free consultation and quote for your project

Not ready yet? Estimate the cost with our calculator